If a stump sits in your new fence line, have the fence installer mark the actual post locations before booking stump grinding. A stump beneath a panel span and a stump where a post must go can create different problems. Removing wood along the entire line may do more than the fence needs, while grinding the visible top may leave the planned post hole obstructed.

I'd start with the installer standing at the conflict, looking at the approved layout. That gives you a useful question: does the stump interfere with a required post, with access for installation, or with the finished fence itself?

See whether the layout has a workable option

Ask the installer whether changing a post position or panel arrangement is possible. That can be worth considering when it avoids difficult stump work, but it isn't simply a matter of sliding a marker sideways. Gates, corners, panel dimensions and the fence design can limit the choice. The proposed fence must also remain in its authorized location.

For example, a post beside a driveway gate may need to stay where the gate design puts it. A post in a longer straight run might offer an alternative, depending on the system. Have the installer explain what each option changes before treating a layout change as a saving. A cheaper removal job isn't helpful if it creates a gate you can't use as planned.

Keep any boundary or shared-fence question separate from the stump estimate. Confirm the location and authority to work before moving the fence line or removing a neighbor's feature. A stump contractor's visit doesn't establish a property boundary.

Ask the fence installer what needs to come out

If the post location is fixed, ask the fence installer what needs to be cleared and what ground condition they'll accept there. Pass that requirement to the stump contractor. Ask whether grinding can achieve it or whether a different removal or excavation scope needs assessment.

The distinction matters because grinding reduces accessible wood; it doesn't establish that a post can be installed through the remaining roots and mixed material. Our guide to stump-grinding depth explains why the next use governs the finish. For a fence, the installer needs to accept the specific post location, not just a generally tidy strip of yard.

Before any ground disturbance, confirm that the contractor doing the excavation has arranged the required utility locating for that work. Sunshine 811's homeowner guidance explains that member utilities mark facilities they own and that private facilities remain the homeowner's responsibility. Identify private irrigation, lighting and other known systems as part of planning; an empty-looking strip beside the fence isn't proof that it's clear below ground.

Check the conflict before closing the job

Agree who checks the exposed location after stump work and before the fence crew commits to installation. If wood remains where the post must go, pause there and have the installer and stump contractor review it. Don't shift the post in the field without checking the design, and don't assume another pass with the grinder is automatically the answer.

Before either crew arrives, write down the approved post location, what the stump contractor will remove and who will check that the fence can be installed there. Give both crews the same notes so they aren't working from different versions of the plan.

D&R evaluates stump work in St. Lucie, Indian River and Martin counties. Send the marked post layout and a wide photo of the conflict, along with the installer’s requirement. We can discuss the stump work against the fence you're actually building.